RTV 2 Silicone Liquid Rubber For Concrete

Pourable Condensation-Curing Silicona Mould Making RTV2 Silicone Liquid Rubber For Making Cement GRC Molds

Brief Introduction of silicone liquid rubber

RTV-2 silicone rubber is a two component material,and it consist of Part A base silicone and Part B curing agent.When the two parts mix together and pour or brush on a object,the silicone base and curing agent can cure to be a silicone mold at room temperature;and 24 hours later,the silicone mold can be released from the object,and then the silicone mold can be poured into the following material to copy: plaster,polyurethane, PU, GRC, cement, resin, polyester, wax etc...

Feature of silicone liquid rubber

Good characteristics of easy-operation
Light viscosity and good flowability
Low shrinkage
Favorable tension
No deformation
Favorable hardness
High temperature resistance, acid and alkali-resistance and ageing resistance

Physical Properties

Extensive Applications of mould making liquid rtv2 silicone to make grc molds

Liquid rtv-2 silicone for gypsum products mold making is also suites for Cultural relic duplication, architectural decoration, statues.

Liquid rtv-2 silicone for gypsum products mold making is application for PU foam, Polyester Resin crafts.
Liquid rtv-2 silicone for gypsum products mold making is used for Lighting ornaments, soap, candles molding.
Liquid rtv-2 silicone for gypsum products mold making is application for Plaster, Gypsum, Cement, Concrete decorations.
Liquid rtv-2 silicone for gypsum products mold making is Model design, product exploitation, etc.

1. Make sure the surface of the original is clean and free of loose material.

2. Weight 100 Part A base and 2 parts of CA30 Curing Agent in a clean container.

3. Stir Part A base silicone before use thoroughly , as filler separation may occur upon prolonged storage.

4. Mix Part A and Part B evenly until the CA30 completely dispersed in the base.

5. Pour the mixed Part A base silicone and CA-30 curing agent as soon as possible onto the original

6. De-mold after 24 hours ,it is will improve the replicate times of silicone mold.

Note:It is strongly recommended that entrapped air be removed in a vacuum chamber, allowing the mix to completely expand and then collapse. After a further 1-2 mins under vacuum, the mix should be inspected and can be used if free of air bubbles. A volume increase of 3-5 times will occur on vacuum de-airing the mixture. So a suitably large container should be chosen.

Facilities

Certificates

Storage & Shelf life

When the silicone rubber is stored at or below 30 centi degree in the original unopened containers, Silicone Base and Curing agent have a usable life of 10 months from the date of production. After 10 months stockpiles use the Stir to mix the Part A silicone for some minutes, then the silicone can be use again, no influence for other performance.

Why Choose Us?

If you're looking for a good silicone supplier, you've come to the right place. Our unique vision and mission drives us bring the best products and service to each of our clients. We gonna be your guide in silicone industry, we are your partner.

Find out why we're a great choice for your needs.

Our Advantages
More than 20 years experience in moldmaking & casting industry
10 years exporting experience

Benefits of MC Silicone
1- A Technology Team: R&D Support
2- A Factory: customize for you in every possible aspect
3- A Sales Team: assist you develop more markets
4- Fast Delivery time about 3-5 working days per order
5- Professional Sales Service, 12-24 hours response
6- Various Payment Method