English
Sign in
| Price | $280 to $1500 |
| MOQ | 1 |
| Delivery Time | 7 work days |
| Brand | NUOYINGJIAYE |
| Place of Origin | China |
| Certification | Explosion-proof certificate |
| Model Number | NYLL-CH |
| Packaging Details | Export standard packing |
| Payment Terms | T/T |
| Supply Ability | 300 pcs/ pre month |
| Place of Origin | China | Speed range of the flow rate | 0.5－10m/s |
| caliber | 300 - 3000 mm | Packaging Details | Export standard packing |
| Model Number | NYLL-CH | Supply Ability | 300 pcs/ pre month |
| Certification | Explosion-proof certificate | Medium temperature | - 20℃ ～+ 130℃ |
| Ambient humidity | 5%～95% | Protection grade | IP65, it can be customized up to IP68 |
| Brand Name | NUOYINGJIAYE | Payment Terms | T/T |
| Accuracy | ±0.5%R， ±1%R (below DN200) | Price | $280 to $1500 |
| Delivery Time | 7 work days | Signal output | 4~20 m A；RS 485；HART protocol；MODBUS protocol |
| Minimum Order Quantity | 1 | Electroconductibility | > 50μs/ cm |
Slurry Cement Corrosive Liquid Water 4-20ma Plug-In Insertion Type Electromagnetic Insertion Flow Meter
NYLL-CR series intelligent electromagnetic flowmeter is a new generation of fully intelligent flowmeter developed by our company based on Faraday electromagnetic induction principle. The electromagnetic flowmeter can not only measure the volume flow of conductive liquid, but also measure the volume flow of corrosive liquid such as strong acid and alkali, and even liquid-solid twophase suspension liquid such as mud, pulp and pulp. It is widely used in the fields of petroleum, chemical industry, metallurgy, textile, pharmacy, food and beverage, paper making, electric power, urban water supply and drainage and environmental protection.
Plug-In Insertion Type Electromagnetic Insertion Flow Meter Technical Parameters
| Caliber | 300 - 3000 mm |
| Speed range of the flow rate | 0 . 1～10 m/ s |
|
Precision |
0 . 5～10 m/ s:±1 . 5 % FS; 0 . 1～0 . 5 m/ s:±2 . 0 % FS 0 . 1～10 m/ s:±2 . 5 % FS(FS refers to 40% to 100% full range flow) |
| Electroconductibility | > 50μs/ cm |
| Straight pipe section | The anterior 5 DN, and the posterior 3 DN |
| Medium temperature | - 20℃ ～+ 130℃ |
| Ambient temperature | - 20℃ ～+ 60℃ |
| Withstand voltage | 1 . 6 Mpa |
| Levels of protection | IP 65, IP 68 |
| Electrode material | 316 L stainless steel |
| Output signal | 4 - 20 m A；RS 485；HART protocol；MODBUS protocol |
| Sensor material | stainless steel |
| Operational principle | 220 VAC, tolerance15 % or 24 VDC, ripple wave≤5 % |
| Capacity factor | 6.5W |
| Pressure resistance level | ≤1.6 Mpa |
All-in-one
type(As
shown
in
the
figure:
left)
The
electromagnetic
flowmeter
converter
adopts
a
novel
excitation
method,
which
has
low
power
consumption,
stable
zero
point
and
long
service
life.
Split
type(As
shown
in
the
figure:
right)
In
addition
to
measuring
the
flow
of
general
conductive
liquids,
the
split
electromagnetic
flowmeter
can
also
measure
the
volume
flow
of
liquid-solid
two-phase
flow,
high-viscosity
fluids
and
salts,
and
strong
acid
and
strong
alkali
liquids.
Plug-In Insertion Type Electromagnetic Insertion Flow Meter Design Features
