English
Sign in
| Price | $100 to $380 |
| MOQ | 1 |
| Delivery Time | 3 work days |
| Brand | NUOYINGJIAYE |
| Place of Origin | China |
| Certification | Explosion-proof certificate |
| Model Number | NYSP-L864 Soft Cable Type |
| Packaging Details | 80cm×17cm×24cm，90cm×30cm×30cm |
| Payment Terms | T/T |
| Supply Ability | 1000 pcs/ pre month |
| Place of Origin | China | Packaging Details | 80cm×17cm×24cm，90cm×30cm×30cm |
| Power supply | 24VDC, 220VAC (optional) | Material | 304+PTFE (optional) |
| Model Number | NYSP-L864 Soft Cable Type | Supply Ability | 1000 pcs/ pre month |
| Certification | Explosion-proof certificate | Protection grade | IP67 |
| Brand Name | NUOYINGJIAYE | Payment Terms | T/T |
| Explosion-proof grade | Exia IICT6 (optional) | Price | $100 to $380 |
| Delivery Time | 3 work days | Process connection | Screw thread, Flange(optional), Flanged |
| Minimum Order Quantity | 1 | Probe rod length | 500mm (customizable as required) |
| Process pressure | < 2.0MPa | Operating temperature | -40~130℃ |
NYSP-L864 (Soft Cable Type) RF Admittance Switch
NYSP RF Admittance SwitchTechnical Parameter
| Applications |
vertical top installation, can be used as coal conveyer |
| Material |
304+PTFE
(optional)
|
| Probe rod length | 500mm (customizable as required) |
| Power supply | 24VDC, 220VAC (optional) |
| Process temperature | -40 〜+130 °C |
| Process pressure | 0~ 2.0MPa |
| Process connection | Thread, flange (optional) |
| Time delay | 0〜30s adjustable |
| Power loss protection | open, close, field switchable |
| Output relay | double pole, double throw (DPDT) output,5A, 24V DC or 5A, 220VAC |
| Protection grade | IP67 |
| Explosion-proof grade | Exia IICT6 (optional) |
※
Note:
Products
can
be
customized
according
to
the
specific
requirements
of
users!
NYSP
RF
Admittance
Switch Installation
requirements
Note:
When
the
RF
admittance
level
switch
is
installed
horizontally,
the
length
of
the
probe
cover
G
must
be
extended
into
the
wall
of
the
port;
in
vertical
installation,
the
total
length
of
the
probe
S
must
be
equal
to
or
greater
than
the
position
of
the
control
point.
