Price | $450~$1700/pc |
MOQ | 1 pc |
Delivery Time | 7 working days |
Brand | NUOYINGJIAYE |
Place of Origin | Xi'an, Shaanxi,China |
Certification | CE |
Model Number | NYCZ500 |
Packaging Details | Carton, 60cm×30cm×30cm |
Payment Terms | T/T |
Supply Ability | 1000 pcs/month |
Place of Origin | Xi'an, Shaanxi,China | Typical application | Liquid level and interface measurement |
Packaging Details | Carton, 60cm×30cm×30cm | Model Number | NYCZ500 |
Supply Ability | 1000 pcs/month | Certification | CE |
Brand Name | NUOYINGJIAYE | Payment Terms | T/T |
The antenna form type | cable、rod | Explosion-proof grade | Exia II CT6Ga, Exd II CT6Gb (see certificate for details) |
The antenna form material | 304、316 | Accuracy of measurement | ±0.5mm |
Price | $450~$1700/pc | Delivery Time | 7 working days |
Process connection | flange(optional)) | Minimum Order Quantity | 1 pc |
Process pressure | -0.1 ~10 MPa | Product models | NYCZ500 |
High Accuracy Magnetostrictive Liquid Level Meter Easy Installation
Working
Principle
of Magnetostrictive
Liquid
Level
Meter
When
the
magnetostrictive
liquid
level
meter
works,
the
pulse
generator
in
the
electronic
chamber
sends
out
a
starting
pulse.
When
the
starting
pulse
is
transmitted
in
the
waveguide
wire,
a
rotating
magnetic
field
goes
forward
along
the
direction
of
the
waveguide
wire
is
generated.
When
the
magnetic
field
meets
the
permanent
magnetic
field
in
the
floating
ball,
the
magnetostrictive
effect
is
generated,
causing
the
waveguide
wire
to
twist
to
generate
a
constant
speed
mechanical
wave.
This
mechanical
wave
propagates
in
two
directions.
The
mechanical
wave
reaching
the
end
of
the
measuring
rod
is
absorbed
by
the
damper.
The
mechanical
wave
transmitted
back
to
the
direction
of
the
electronic
bin
is
sensed
by
the
energy
pickup
mechanism
installed
in
the
electronic
bin
and
converted
into
corresponding
current
pulses.
The
energy
pickup
mechanism
then
calculates
the
time
difference
between
the
two
pulses
to
accurately
measure
the
height
of
the
measured
liquid
level.
Design
feature of
Magnetostrictive
Liquid
Level
Meter
◎Wider applicability, with multiple probe forms, multiple process connection forms, multiple manufacturing materials, and customizable design
◎ strong reliability: since the magnetostrictive liquid level gauge adopts the waveguide principle, there is no mechanical movable part, so there is no friction and wear. The whole converter is enclosed in a stainless steel tube, which is non-contact with the measuring medium. The sensor works reliably and has a long service life
◎ high accuracy: since the magnetostrictive liquid level meter works with waveguide pulse, the measured displacement is determined by measuring the time of the start pulse and the end pulse, so the measurement accuracy is high and the resolution is better than 0.01% FS, which is difficult to achieve with other sensors
◎ high safety: the magnetostrictive liquid level meter has high explosion-proof performance, intrinsic safety and explosion-proof, safe use, and is especially suitable for the measurement of chemical raw materials and flammable liquids. There is no need to open the tank cover during the measurement to avoid the insecurity of manual measurement.
◎ magnetostrictive liquid level meter is easy to install and easy to maintain: the magnetostrictive liquid level meter is generally installed through the existing pipe orifice on the tank top, especially suitable for the installation of underground storage tanks and storage tanks that have been put into operation, and normal operation can not be affected during the installation process
Technical parameters of Magnetostrictive Liquid Level Meter
Typical application | Liquid,Interface measurement |
product model |
NYCZ500 |
Antenna Form |
Cable, pole type |
Antenna material |
304,316 |
measuring range | 0-50m~5000mm(cable:25m) |
Measurement precision | ±0.5mm |
Power Supply | 24VDC(two line, four line), 220VAC |
signal output |
4...20mA/HART/RS485/Modbus... |
Working current |
4…20mA |
Load characteristics | When the current is output, the maximum load resistance is 600Ω; When the voltage is output, the maximum load resistance is 2mA |
Process Temperature | -40~+200℃ |
response time | 0.2~5ms |
Process pressure | -0.1~10.0MPa |
Process connection | screw thread,bracket,flange(selectable) |
resolution ratio | ±1mm |
levels of protection | IP65,IP67,IP68(selectable) |
Explosion-proof grade | Exia II CT6 Ga,Exd II CT6 Gb(See certificate for details) |
※Note:The
product
can
be
customized
according
to
the
specific
requirements
of
users.