Price | Negotiable |
MOQ | 100 |
Delivery Time | 15-20 work days |
Brand | UVIR |
Place of Origin | China |
Certification | CE |
Model Number | 10mm |
Packaging Details | Each lamp in a cylinder .Then in a professional plywood box. |
Place of Origin | China | Packaging Details | Each lamp in a cylinder .Then in a professional plywood box. |
Material | Stainless Steel | Model Number | 10mm |
Certification | CE | Base | Ceramic white base |
Brand Name | UVIR | Price | Negotiable |
Delivery Time | 15-20 work days | Minimum Order Quantity | 100 |
Wave Range | Medium Wave | Structure | Wave Clamp |
Application | Twin tube M-W infrared lamp | Tube Diameter | 10mm |
Our company produces and wholesales: ultraviolet lamps, infrared lamps, ultraviolet germicidal lamps, xenon lamps and other special light sources and peripheral accessories products, lamp stands, transformers, etc. Various products can be customized according to customer requirements.
Product information
Product name | IR lamp holder |
Type | lamp clip for medium wave twin tube |
Color | Ceramic white + silver |
Material | Ceramic + aluminum |
Application area | Twin tube Infrared Heat Lamp |
MOQ | 100pcs. |
CLAMPS FOR MEDIUM WAVE TWIN LAMPS
Twin
Tube Cross- Section |
a | b | c | d | e | M | UVIR NO. |
![]() |
10 | 23 | 25 | 20 | 10 |
M5 x 20 |
GJ0002L |
![]() |
15 | 33 | 30 | 25 | 15 |
M5 x 25 |
GJ0003L |
![]() |
8 | 18 | 25 | 25 | 10 |
M5 x 20 |
GJ0001L |
Operating Instructions
The infrared twin-tube emitter is suited for horizontal operation only. Special IR emitters for vertical installation positions are specially manufactured and marked as such.
To install our IR emitters, usually one mounting and one spring clamp, and if necessary, one or several central supports all manufactured by HNI are to be used.The IR twin-tube emitter must be secured in position of a stable support(steel support plate: > 1.5 mm).
The IR emitter(s) must be assembled in the following order:
1.
Drill
mounting
holes
with
Φ9.2
mm
for
clamp.Spring
in
the
support
(mounting
plate)at
distance
L.
2.Screw
the
clamp
spring
in
place
with
ceramic
washers
(1)
on
the
mounting
plate
(4).
3.Press
the
IR
emitter
into
position
in
the
retaining
spring
clip.
The
emitter
must
point
at
all
the
surface
to
be
heated.
The
gold
reflector
should
be
pointing
towards
the
support
plate.
4.Tighten
the
fastening
nuts
(2)
on
the
knurled
nut
(3).
Pulling the lead wire must not cause any tension on the press seal. Bending radius of lead wire: > 30 mm
Mounting
dimensions:
L
=
Overall
length
of
emitter
LG:2x35
mm
(two-sided
connection)
or
L
=
Overall
length
of
emitter
LG:35
mm
-20
mm
(one-
sided
connection)
If
the
following
overall
emitter
lengths
are
exceeded
for
LG,
a
central
support
is
necessary:
Tube
dimensions:23
x
11,
LG
>1
500
mm
and
tube
dimensions
34x14,
LG
>
2000
mm
After installation, the quartz glass tube of the IR emitter must be cleaned on the side without gold plating. For this purpose, please use the cleaning cloth included in our delivery or a clean linen cloth (without textile finishing agents) soaked in methylated spirit (such as rubbing alcohol) to remove any impurities/soiling or fingerprints from the surface.
Other IR Holder parameter:
Wave Range | Tube Diameter(mm) |
UVIR Model No |
Heraeus Model No. |
Short Wave | 8 x 18 | GJ0001 | 09759293 |
Short Wave | 11 x 23 | GJ0002 | 09759287 |
Short Wave | 15 x 33 | GJ0003 | 09758026 |
Medium Wave | 8 x 18 | GJ0001L | 09758010 |
Medium Wave | 11 x 23 | GJ0002L | 09758013 |
Medium Wave | 15 x 33 | GJ0003L | 09758016 |
Application:
After Sales Service
1. Package tracking
2. Technical support
3. 24 hours working time
4. Discount for reorder
5. Replacements for quality problems
6. Confidentiality of customer information
Our Services & Strength
* Expert sales teams are responsible for accurate communication.
* Professional technical teams are responsible for new product development.
* Technical production teams are responsible for assembly line production.
* Expert quality inspection teams are responsible for quality inspection.
* Experienced after-sales teams are for all customers.
FQA
1.Are you a factory or trading company?
We are a professional factory.
2.Where is your factory located?How can I visit there?
Our factory is located in JiangMen City,Guangdong Province,China,You can fly to GuangZhou BAIYUN airport directly,Warmly welcome all the clients at home and broad to visit us!
3. Can I get some samples?
We are happy to offer samples for you to check and test.
4.Do you have any MOQ limit?
Low MOQ,1pcs for sample checking is available.
5.What about the lead time?
15days after receive your payment.
6.How does your factory do regarding quality control?
"Quality is priority."UVIR people always attaches more importance to QC from the very begining to the very end.Our factory has gained CE,ISO9001,RoHS,SGS authentication.
7.About customized service?
We can provide right heat solution for you and offer OEM services, we can print your logo on your product as your requirements.