English
Sign in
| Price | Negotiable |
| MOQ | 100 |
| Delivery Time | 15 work days |
| Brand | UVIR |
| Place of Origin | China |
| Certification | CE |
| Model Number | 14mm |
| Packaging Details | Each lamp in a cylinder .Then in a professional plywood box. |
| Place of Origin | China | Size | 14mm |
| Packaging Details | Each lamp in a cylinder .Then in a professional plywood box. | Model Number | 14mm |
| Certification | CE | Brand Name | UVIR |
| Type | Porcelain Lamp Holder | Price | Negotiable |
| Delivery Time | 15 work days | Product name | IR Lamp holder |
| Minimum Order Quantity | 100 | Applicable | short wave Twin tube lamp |
| Sizeplace of shipment | China,Guangdong |
14mm IR Lamp Holder , twin tube short wave Infrared Heat Lamp Holder
CLAMPS FOR SHORT WAVE TWIN L AMPS
|
Twin
Tube Cross- Section |
a | b | c | d | e | M | UVIR N0. |
|
10 | 23 | 25 | 25 | 10 |
M5 x 20 |
GJ0002 |
|
15 | 33 | 30 | 25 | 15 |
M5 x 25 |
GJ0003 |
Product Details
Operating Instructions
The infrared twin-tube emitter is suited for horizontal operation only. Special IR emitters for vertical installation positions are specially manufactured and marked as such.
To install our IR emitters, usually one mounting and one spring clamp, and if necessary, one or several central supports all manufactured by HNI are to be used.The IR twin-tube emitter must be secured in position of a stable support(steel support plate: > 1.5 mm).
The IR emitter(s) must be assembled in the following order:
1.
Drill
mounting
holes
with
Φ9.2
mm
for
clamp.Spring
in
the
support
(mounting
plate)at
distance
L.
2.Screw
the
clamp
spring
in
place
with
ceramic
washers
(1)
on
the
mounting
plate
(4).
3.Press
the
IR
emitter
into
position
in
the
retaining
spring
clip.
The
emitter
must
point
at
all
the
surface
to
be
heated.
The
gold
reflector
should
be
pointing
towards
the
support
plate.
4.Tighten
the
fastening
nuts
(2)
on
the
knurled
nut
(3).
Pulling the lead wire must not cause any tension on the press seal. Bending radius of lead wire: > 30 mm
Mounting
dimensions:
L
=
Overall
length
of
emitter
LG:2x35
mm
(two-sided
connection)
or
L
=
Overall
length
of
emitter
LG:35
mm
-20
mm
(one-
sided
connection)
If
the
following
overall
emitter
lengths
are
exceeded
for
LG,
a
central
support
is
necessary:
Tube
dimensions:23
x
11,
LG
>1
500
mm
and
tube
dimensions
34x14,
LG
>
2000
mm
After installation, the quartz glass tube of the IR emitter must be cleaned on the side without gold plating. For this purpose, please use the cleaning cloth included in our delivery or a clean linen cloth (without textile finishing agents) soaked in methylated spirit (such as rubbing alcohol) to remove any impurities/soiling or fingerprints from the surface.
After Sales Service
1. Package tracking
2. Technical support
3. 24 hours working time
4. Discount for reorder
5. Replacements for quality problems
6. Confidentiality of customer information
Our Services & Strength
* Expert sales teams are responsible for accurate communication.
* Professional technical teams are responsible for new product development.
* Technical production teams are responsible for assembly line production.
* Expert quality inspection teams are responsible for quality inspection.
* Experienced after-sales teams are for all customers.
FAQ
Q1: Are you a factory or trading company?
A1 We are manufacturer.
Q2: Can I have a sample order ?
A2: Yes, we accept sample order to test and check quality.
Q3. What's the lead time for sample and batch order?
A3.5-7 days for samples, 2-3 weeks for batch order. We normally have inventory for some of the models.
