English
Sign in
| Price | Negotiated |
| MOQ | 1pcs |
| Delivery Time | 5-12working days |
| Brand | E-link |
| Place of Origin | China |
| Certification | ISO9001, CE, FCC, RoHS |
| Model Number | LNK-E1F1 Series |
| Packaging Details | standard export package |
| Payment Terms | T/T,PayPal |
| Supply Ability | 1000pcs/mouth |
| Place of Origin | China | Packaging Details | standard export package |
| Storage temperature | -40°C ~ 80°C | Power supply | AC90V ~ 240V；DC –48V；DC +24V |
| Model Number | LNK-E1F1 Series | Supply Ability | 1000pcs/mouth |
| Certification | ISO9001, CE, FCC, RoHS | Brand Name | E-link |
| Payment Terms | T/T,PayPal | Dimensions (WxDxH): | 216X140X31mm |
| Power consumption | ≤10W | Price | Negotiated |
| Delivery Time | 5-12working days | Minimum Order Quantity | 1pcs |
| Piece weight | 1.2KG | Operating Temperature: | -10°C ~ 50°C |
Unframed 1E1 to 1FE Interface Converter Advantage
· Based on self -copyright IC
· Support unframed mode (2048K) set and can manage the remote device condition, OAM management data did not take up user’s timeslot
· Have the function of E1 interface loop back check, avoid the converter crashed because of interface loop back;
· Have indicator when the device is power-off or E1 line is broken or lose signal;
· Can set the E1 line that not to send the LINK signal to Ethernet interface while E1 line is broken;
· The Ethernet interface supports jumbo frames (2036 Bytes);
· Inter-set dynamic Ethernet MAC address (4,096) with local data frame filtering
· Ethernet interface supports10M/100M, half/full duplex auto- Negotiation and AUTO-MDIX (crossed line and straightly connected line self-adaptable);
· Have Ethernet monitor self-reset function, the equipment will not dead
· Can achieve the remote device setting any 5 mode of Ethernet and can closed the AUTO-MDIX function;
Unframed 1E1 to 1FE Interface Converter Overview
This interface converter provides one unframed 2048K E1 interface and one Ethernet interface to achieve 10/100Base-T Ethernet data transmission on the E1 channel. It is a high performance, self-learning Ethernet bridge. This device is the extension device of Ethernet, using network (PDH/SDH/Microwave) that provide E1 channel to achieve local and remote Ethernet interconnecting with serial interfaces at a lower cost. The device has inter-set loop test function to facilitate the project launching and daily maintenance.
Unframed 1E1 to 1FE Interface Converter Technical Indexes
|
Parameter |
Specification |
|
E1 Interface |
|
|
Interface Standard |
comply with protocol G.703 |
|
Interface Rate |
n*64Kbps±50ppm |
|
Interface Code |
HDB3 |
|
E1 Impedance: |
75Ω (unbalance), 120Ω (balance) |
|
Jitter tolerance |
In accord with protocol G.742 and G.823 |
|
Allowed Attenuation |
0~6dBm |
|
Ethernet Interface (10/100M) |
|
|
Interface rate |
10/100 Mbps, half/full duplex auto-negotiation |
|
Interface Standard |
Compatible with IEEE 802.3, IEEE 802.1Q (VLAN) |
|
MAC Address Capability |
4096 |
|
Connector |
RJ45, support Auto-MDIX |
|
Power |
|
|
Power supply |
AC90V ~ 240V；DC –48V；DC +24V |
|
Power consumption |
≤10W |
|
Dimension |
|
|
Product Size (WXDXH) |
216X140X31mm |
|
Simple Packaging (WXDXH) |
274X193 X84mm |
|
Piece weight |
1.2KG |
|
Working environment |
|
|
Working temperature |
-10°C ~ 50°C |
|
Working Humidity |
5%~95 % (no condensation) |
|
Storage temperature |
-40°C ~ 80°C |
|
Storage Humidity |
5%~95 % (no condensation) |
Unframed 1E1 to 1FE Interface Converter Application
