Precision ODM Aluminum CNC Machining Parts For Lock Anodizing Clear

Precision SUS304 CNC Machining Parts For Lock Part With ISO9001

Quick Detail

Description

    This CNC Machining Part is based aluminum profile 6061 material to processing, first of all, we check the raw material dimension is fine or not, the second is that according to the drawing, use the CNC Gear shovel machine to do the dimension, the third is that accroding to the drawing, uthe forth is that use the CNC to do exact dimension, the fifth is do anodizing , the last step is riveting, and then inspection/packing. First inspection and patrol inspection are done in processing . 

Note

What should we pay attention to when machining CNC precision parts?

1. The CNC lathe processor must read the content of the process card clearly before processing, clearly know the part, shape, drawing and size of the workpiece to be processed, and know the processing content of the next process.

2. Before the workpiece is clamped, the size of the blank should be measured whether it meets the requirements of the drawing. When the workpiece is clamped, it must be carefully checked whether its placement is consistent with the programming operation guide.

3. The self-check should be carried out in time after the rough machining is completed, so that the data with errors can be adjusted in time. The content of the self-inspection is mainly the position and size of the processing part.

• Whether the workpiece is loose;
• Whether the workpiece is correctly centered;
• Whether the dimension from the machining position of CNC hardware parts to the reference edge (reference point) meets the requirements of the drawing;
• The size of the position between the CNC machining parts. After checking the position and size, the rough-cut shape ruler should be measured (except for arcs).

We can offer CNC machining partd for custom design.