SUS304 Precision Metal Aluminum Stamping Parts For Bottle Cap Practical

SUS304 Precision Aluminum Stamping Parts For Bottle Cap With ISO 9001

Quick Detail

Note

The stamping process is a metal processing method, which is based on the plastic deformation of metal. It uses molds and stamping equipment to apply pressure to the sheet to cause plastic deformation or separation of the sheet, so as to obtain a certain shape, size and performance. Parts (stamping parts).

Stamping process
The stamping process can be divided into four basic processes:
Punching: The stamping process (including punching, blanking, trimming, cutting, etc.) that separates the sheet.
Bending: The stamping process of bending the sheet into a certain angle and shape along the bending line.
Deep drawing: A stamping process that transforms a flat sheet into various open hollow parts, or further changes the shape and size of the hollow parts.
Fine blanking: For products with high blanking precision, products with high requirements on size and surface light can be achieved through fine blanking molds to meet the requirements of the drawings.
Local forming: the stamping process (including flanging, bulging, leveling and shaping processes, etc.) that uses various local deformations of different properties to change the shape of the blank or stamping part.

Features

• Stamping is a processing method with high production efficiency and low material consumption. The stamping process is suitable for the production of larger batches of parts, which is easy to realize mechanization and automation, and has high production efficiency.
• At the same time, stamping production can not only strive to achieve less waste and no waste production, but also has margins in some cases. The leftover material can also be fully utilized.
• The operation process is convenient and does not require the operator to have a higher level of skill.​ The stamped parts generally do not need to be mechanically processed, and have high dimensional accuracy.
• Stamping parts have better interchangeability. Stability of stamping processing is better, the same batch of stamping parts. Can be used interchangeably without affecting assembly and product performance.
• Since the stamping parts are made of plates, its surface quality is better, which provides convenient conditions for subsequent surface treatment processes (such as electroplating and painting).
• Stamping can obtain parts with high strength, high rigidity and light weight.
• The cost of stamping parts produced in batches with molds is low.
• Stamping can produce parts with complex shapes that are difficult to process with other metal processing methods.

we can offer the al5052/1050/SUS304/steel stamping parts for custom design service.