JGB37-550 High Torque Micro DC Gear Motors 12v DC Motor 6 Volt

Now ,you can get our this 37mm dc gear motor with magnetic encoder(JGB37-520B),and other related 37mm gearbox motors as following:

JGB37-520B	JGB37-3530	JGB37-3157	JGB37-3625
JGB37-3650	JGB37-545	JGB37-550	ZGA37-3530

1.Name of the motor: JGB37-550 Micro 6v12vDC Gear Motor

2. Rated voltage have DC 6V and DC 12V

3. DC 6V ; You can choose the no load speed have :

9rpm/14rpm/26rpm/43rpm/55rpm/80rpm/130rpm/240rpm/380rpm/725rpm/1150rpm

Rated torque between 0.5 To 30 KG.CM; stall torque: between 1-35KG, it is recommended that your project load not exceed the rated torque; select a no load speed in DC 6V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.

4. DC 12V ; You can choose the no load speed have :

18rpm/28rpm/53rpm/86rpm/110rpm/160rpm/260rpm/480rpm/770rpm/1450rpm/2300rpm

Rated torque between 1.2 To 28 KG.CM; stall torque: between 2.1-35KG, it is recommended that your project load not exceed the rated torque; select a no load speed in DC 12V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.

5. Direction of rotation of the motor: CW Or CCW ; Support Reversed

6. The shaft shape of the motor : D type, please refer to the size chart below for all dimensions of the motor.

7. Gear material: Metal gears make the motor last longer

8. The speed of the motor can be adjusted using the speed controller. This motor and speed controller are sold in combination. You can refer to the combination sales introduction below.

9. The motor has standard noise when working. If your project has requirements for the working noise of the motor, please consult us before purchasing. We will give you some suggestions. Thank you.

When the motor is reversed, the working sound of the motor will be greater than the forward rotation, which is normal.

10. Motor DC power connection is safe; the experiment proves that the motor voltage is lower than 36V without any danger.

11. This motor is suitable for a variety of micro-automation equipment. As long as you confirm that the motor voltage and torque of your choice are suitable for the voltage and load of your project before purchase, there is no limit to the scope of use of this motor.

 
 
Datasheet: