Welded Aluminum Honeycomb Panel Used In Internal Floating Roof

INTRODUCTION

This material is a metal structural material made by using aluminum honeycomb as the core material, with aluminum or stainless steel panels on both sides, and then combining them and brazing them in one go. The main materials used are solder, tin and stainless steel.

• Be re-welded and processed
• Light weight but high-strength
• Rigid & Stable
• Heat-insulating
• Sound-insulating
• Pollution-free

It overcomes the drawback that the honeycomb core of the existing adhesive honeycomb panels is greatly affected by the performance of the adhesive. Its mechanical properties are much higher than those of the adhesive materials, and all properties have been significantly improved, making it suitable for industrial production.

Mechanical performance

 

  

Good impact resistance

---

 

 

WAHS can absorb impact energy quickly after being impacted due to its good connection strength,therefore its impact resistance is much better than its likewise products

 

Below is vertical impact test with 500g cement balls at a speed of 380km/h.

 

 

The front of plate after test

 

The back of plate after test

 

 

Applications

---

Petrochemical Industry

Welded honeycomb composite plate, with the characteristics of "light weight" , "high strength" and "lightning protection" , has become an ideal material for floating roof and outer shell of oil tank. It effectively solves the problems of floating plate settling, structure collapse, oil and gas volatilization and so on.