English
Sign in
| Price | Negotiated |
| MOQ | 100pcs |
| Delivery Time | 1-10DAYS |
| Brand | YXC |
| Place of Origin | China |
| Certification | RoHS |
| Model Number | X206032768KGB2SC |
| Packaging Details | Standard package |
| Payment Terms | T/T, Western Union |
| Supply Ability | 50000PCS |
| Load Capacitance | 12.5PF | Production name | 32.768KHZ 12.5PF 10PPM QUARTZ CRYSTAL UNITS X206032768KGB2SC |
| Place of Origin | China | Category | Crystals, Oscillators, Resonators Crystals |
| Nominal frequency | 32.768KHz | Packaging Details | Standard package |
| Frequency Stability | ±10ppm | Model Number | X206032768KGB2SC |
| Mounting Type | Through hole | Supply Ability | 50000PCS |
| Certification | RoHS | Brand Name | YXC |
| Payment Terms | T/T, Western Union | Series | QUARTZ CRYSTAL UNITS |
| Package / Case | dip2 | Price | Negotiated |
| Delivery Time | 1-10DAYS | Minimum Order Quantity | 100pcs |
| Height | 2.0mmx6.0mm | Stock | In Stock |
Electronic components 32.768KHZ 12.5PF 10PPM QUARTZ CRYSTAL UNITS X206032768KGB2SC Directly inserted cylindrical crystal oscillator
Part number:
| Package type | Part number | Model Number |
| 2P 2060 | X206032768KGB2SC | YT-26 |
| 2P 3080 | X308032768KGB2SC | YT-38 |
Description:
| Frequency (HZ) | 32.768KHZ |
| Frequency offset (PPM) | ±10PPM |
| Voltage (V)/ Load (PF) | 12.5PF |
| Working Temperature | ,-20℃~+70℃ |
| Dismensions (mm) | 2.0mmx6.0mm |
Reliability Test Items
1. Mechanical Performance Tests
| Shock |
Orient the sample in any attitude and drop it three times from a height of 75 cm onto a hardwood board with a thickness of 3 cm
|
| Vibration |
Subject
the
sample
to
1.5-minute
cycles
of
frequencies
of
10
to
55 Hz and amplitudes of 1.5mm for two hours in each of the X,Y, and Z directions, or 6 hours in total. |
| Tensile strength of terminal |
Apply
a
1.5Kg
tensile
load
to
each
terminal
and
sustain
it
for 30±5 seconds. |
|
Bending
strength of terminal |
Apply
a
0.5
Kg
load
to
one
of
the
terminals,
and
after
tilting
the main unit for 90°,restore to its original attitude. Then, tilt it in an opposite direction for 90°,and restore to its original attitude |
| Solder ability |
Dip
terminals
in
RMA
flux
for5
±
0.5
seconds.
Under
room temperature. Dip terminals in a 230±5℃ solder bath for 5±0.5 seconds. The solder shall leave an undipped terminal length of 2 mm at their base . |
|
Resistance
to Soldering Heat |
Dip
terminals
in
a
260±5℃
solder
bath
for
10±0.5
seconds. The solder shall leave an undipped terminal length of 2 mm at their base |
| Leaking Test |
Take
measurements
with
a
helium
leakage
detector,or
measure insulation resistance under pressure. |
Specifications:
| Specification Number | Specifications |
| A |
Any
variation
between
the
pre-
and
post-test
frequencies
shall
remain
within
±5ppm.
The post-test equivalent series resistance shall remain within its specified tolerance range. |
| B |
Any
variation
between
the
pre-
and
post-test
frequencies
shall
remain
within
±10ppm. The post-test equivalent series resistance shall remain within its specified tolerance range |
| C | After each test, no visible damage shall be manifested, nor shall the hermetic seal break down. |
| D | At least 90% of each dipped area shall be covered by fresh solder |
| E |
1×10-2
μPa．m3 /s Max or IR≥500MΩ |
Remark:Measurements
shall
be
taken
at
25±2℃,and
after
each
test,
the
sample
be
exposed
to
two
hours
at
25±2℃
