Compact Atlas Screw Air Compressor G Series 15-26kw Atlas Rotary Oil Injected 7.4-12.8bar Working Pressure

Compact Screw Compressor G Series 15~26kw Atlas Rotary Oil Injected 7.4-12.8bar Working Pressure
 

Click to open our catalog:G2-90 wuxi leaflet EN 2935081343.pdf

Compact Economical Compressors G15/G18/G22/G26

Premium GA quality and optimal serviceability at the lowest initial investment.
• Good-quality, dry air thanks to the integrated dryer.
• Total control and assured efficiency with the Elektronikon ® controller.

Set to tackle your daily challenges, Atlas ’s high-performance GA compressors beat any workshop solution. Ready to supply high-quality air, they keep your air network clean and your production up and running.

Robust element & motor
• The GA 15-26’s compression element, the most used in its size, is combined with an IE3/NEMA Class 1 efficiency motor.
• A 2-3% higher efficiency with the gear-driven drive train compared to belt-driven systems.
• Gear-driven drive train for best-in-class reliability and limited maintenance.

Advanced monitoring
• State-of-the-art monitoring using a simple Ethernet connection, thanks to the Elektronikon ® with a built-in server.
• Service and warning indications, error detection and compressor shut-down.
• Optional Elektronikon ® graphic controller for further enhanced remote monitoring features and service time indications.

High-tech oil vessel
• Protection from oil contamination: extremely low oil carry-over thanks to the vertical design of the oil vessel.
• Extremely low losses of compressed air during load/unload cycle thanks to minimized oil vessel size.

 Integrated quality air solutions
• The integrated dryer avoids condensation and corrosion in the network. Optional filters for air quality up to ISO Class 1 level (<0.01 ppm).
• Standard included water separator.
• Additional energy savings with the dryer’s no-loss electronic drain.

Easy installation
• A true plug-and-play solution, ideal machine for installation companies and OEMs.
• Optional integrated dryer.
• Easy transportation by forklift.
• Remarkably compact footprint.

Specifications

* Unit performance measured according to ISO 1217, Annex C, Edition 4:2009.
Reference conditions:
• Absolute inlet pressure 1 bar (14.5 psi)
• Intake air temperature 20°C, 68°F
FAD is measured at the following working pressures:
• 7.5 bar versions at 7 bar
• 8.5 bar versions at 8 bar
• 10 bar versions at 9.5 bar
• 10.5 bar serion at 10 bar
• 13 bar versions at 12.5 bar

Applications
• Auxiliary or main heating of warehouses, workshops…
• Industrial process heating
• Water heating for laundries, industrial cleaning and sanitary facilities
• Canteens and large kitchens
• Food industry
• Chemical and pharmaceutical industries
• Drying processes