Hydraulic Stacker Car Parking System Equipment Ground Side Moving

The ground side moving stacker type parking equipment

Characteristics

• Very save space, no longer need to lane, ramp, pavement... Fewer layers;
• Simple to use: parking space automatically sent to the front of the driver;
• The driver more comfortable: no longer use the parking lot and dark staircase, not in the narrow and steep slopes driving; Car safer: is not the risk of damage, theft and damage;
• Fast running time: general under 2 minutes; Cost savings, reduce the use of civil engineering, air conditioning and lighting;
• More environmental protection, reduce noise, emissions and land cover;
• High automation level, fully enclosed construction, car security is good;
• Using PC and PLC control system, to achieve automatic operation, accurate equipped with photoelectric detection, fall prevention device, safe and reliable use frequency control of motor speed, stable operation, reliable positioning, security, good site, size and space height, free to set the number of columns and layers, the maximum to meet customer needs to expand the parking space.
• This type is mainly used for: longitudinal long three parking lots, and width of two or more parking area wide, occupies an area of 100 square above, should the car quantity for a rotary table for: width of N wider X2X layers

 

 

Main Technical Parameters

Operating mode automatic/manual lifting speed (m/min) 30 longitudinal velocity (m/min) 60 transverse velocity (m/min) 16 lifting motor power (kw) 7.5-22 longitudinal power (kw) 0.75 x 2 horizontal motor power (kw) 0.55 AC 50 hz, 380 v power supply

 

 

Project case