Price	Negotiable
MOQ	1
Delivery Time	3 days, depend on the order quantity
Brand	VEIKONG
Place of Origin	China
Certification	CE
Model Number	VFD500-PV
Packaging Details	the power less than 45kw use Carton, starting from 45kw use Wooden case
Payment Terms	L/C, T/T, Western Union
Supply Ability	15000pcs per Month

Product Details

Place of Origin	China	Output power	0.75kw-160kw
Packaging Details	the power less than 45kw use Carton, starting from 45kw use Wooden case	Product Name	Three phase Solar Pump Inverter
Model Number	VFD500-PV	Supply Ability	15000pcs per Month
Certification	CE	Inverter efficiency(peak)	>99%
Brand Name	VEIKONG	Payment Terms	L/C, T/T, Western Union
Type	DC/AC Inverters	Price	Negotiable
Delivery Time	3 days, depend on the order quantity	Minimum Order Quantity	1
Frequency	50hz/60hz	Protection level	IP20/IP65

Solar pump inverter 380v 2.2kw 4kw with LCD keypad for irrigation system

Despription and features

Whenever possible, the controller attempts to regulate the pump load in a manner that optimizes for maximum power transfer from the solar array.
The drive manually switches to AC backup power( when available) if the DC primary source is unable to support pump operation
TI DSP technology and Infineon PIM design, high quality.
MPPT function is available
An easy to interface is provided to enhance configurability and enable remote system monitors
A four-digit seven-segment display provides a detailed indication of systems status.
Two line display keypad is options
Built in RS485 ports through 7.5kw, laptop software control is available

Protection features

Protection features : Electronic monitoring gives the controller the capability to monitor the system and automatically shut down in the even of: Dry run conditions- with smart pump monitoring, High voltage surge, Low input voltage, Open motor circuit, Short circuit, Over heat, Earth fault, Phase missing
Dry protection : If no water in the ground, the water pump will stop working automaticallly and when the water comes, starts to working automatically.
Automatic working: When the sunshine not good then pumps slow down automatically and when sunline become good then go on working.
Save cost/directly connect solar panel: Solar panel connects solar inverter directly and to the pump. Also control the water level in the tank. No enough water in the tank working fast, enough water will stop working automatically. (how much water you need, you can set parameters)
Speed & frequency control, No need battery: 0-320hz output by Vector control/0-3200hz output by VF control. No need battery in system.

Electrical Specifications and Power degree

PV input
Maxiumum input DC voltage	400V DC
Recommended MPPT voltage range	250~350V DC
Recommended input Operation Voltage	310V DC
Grid or backup generator input
Input voltage	Single phase 220V(-15%~30%)
Output Specification
Rated output voltage	3PH 220V
Output frequency	0~500.00Hz (default: 0~50.00Hz)
380V Solar Pumping Inverter
Input Specification
PV input
Maxiumum input DC voltage	800V DC
Recommended MPPT voltage range	450~650V DC
Recommended input Operation voltage	540V DC
Grid or backup generator input
Input voltage	Three phase 380V(-15%~30%)
Output specification
Rated ouput voltage	3PH 380V
Output frequency	0~500.00Hz (default: 0~50.00Hz)
Protection
Built-in Protection	Lighting Protection ,over-current, overvoltage, ouput phase lose, under-load, under-voltage, short circuit , overheating, water pump run dry etc.

Product Application

FAQ

1. How to achieve Automatic start after stop?

If it is controlled by keyboard no need to set any parameter. If you want to control by external switch

As the default control mode is keypad control, First set P00.06=1 and use a wire or switch to connect com

and DI1,When the switch is closed, the drive run, when the switch is open, the drive stop

2. How to set minimum frequency ( for example) 30hz and maximum 50HZ

Set P47.05=30HZ and 47.06 to some time and 47.07 to some time. Please refer to details of P47.05-47.07

3. If pump is 60HZ frequency, how to set max frequency?

Notice: If your motor rated frequency is 60HZ First solution for you, P01.06=P01.08=P11.05=60HZ.

Quick setting and easier way: you should set P00.11=02 If your motor is three phase; if your motor is single

phase with capacitor ,set P00.11=22;If your motor is single phase without capacitor ,set P00.11=32

4. Does the product need to set a lot of parameters?

No, it doesn't. The inverter has a self-adaptive and self-learning function. It is automatic start and

stop, you can press Run key to start, or you just wait for P47.03=600S(Default) then it will automatically

start

50/60HZ 0.75kw-160kw Solar Dc Pump Controller 3ph Solar Inverter