| E02-001 Professional electrospinning equipment |
| 1. High voltage power supply system |
5. X-Y Axial displacement motion system |
| Voltage DC:0······~30KV |
X Shaft displacement stroke:50~200mm |
| Current:<1mA |
Y Shaft automatic motion module: effective stroke 150mm, |
| 2.Numerical control operating system |
Positioning accuracy:±0.05mm |
| Control by 4.3 Touch screen and control system communication |
5. Air draft device |
| 3. Liquid supply pump system |
Exhaust air volume of the exhaust fan:0.5m³/min |
| Liquid supply mode: single syringe |
7.Heating device |
| Maximum solution:20ml |
Controllable temperature range: room temperature·~45℃ |
| Automatic feeding speed range:0.01~30ml/h |
Temperature control speed:≤5min; |
| Manual feeding speed range:1~80ml/min |
8.Sprinkler system |
| Applicable syringe specifications:1,10,20ml |
Single needle nozzle |
| Can be installed on the side wall or mobile platform |
9. Equipment outside shell |
| 4.Nanofiber receiver system |
Size:less than 60*60*80cm |
| Roller collection: effective length 150mm |
Colour:light blue |
| Diameter: ф80mm |
Door is transparent colour |
| Speed: 0······~1000r/min |
10.power supply wires |
| Flat collection:L-shaped 180mm*220mm |
220V,吕type triangular plug |