W02-358-7116 Cabin Air Springs For Link 1101-0030 Air Bellow VKNTECH 1S7116

CABIN AIR SPRING FOR L I N K 1101-0030 air bellow W02-358-7116 LINK 1101-0030 GOOD QUALITY VKNTECH 1S7116

Product Description

Technical Drawing

The VKNTECH 1S7116 air spring is a potential replacement option for the cabin air spring with the part number "L I N K 1101-0030" and the air bellow "W02-358-7116." The VKNTECH 1S7116 air spring is designed to offer good quality and compatibility for various applications.

To ensure the proper fitment and compatibility with your specific vehicle or application, it is recommended to consult with a trusted supplier or contact VKNTECH directly. They can provide you with the necessary information and confirm if the 1S7116 air spring is suitable for your needs.

You may find the VKNTECH 1S7116 air spring available through online marketplaces, automotive parts retailers, or by directly contacting VKNTECH. When making a purchase, it is important to compare prices, check for warranty information, and ensure the authenticity of the product.

For further assistance and to obtain accurate and specific information, it is advisable to provide additional details or specifications about the cabin air spring you are looking for.

Why Using an Air Bag Suspension?

The Pros (+)

Comfort

Car and truck manufacturers are increasingly turning to air bag suspensions as a viable alternative. Doing away with conventional springs allows for a much smoother ride, something you can’t get with metal springs. After all, you are - quite literally - floating on a cushion of air!

Flexibility

Do you want to arrive at the next family reunion with your vehicle riding impressively low to the pavement while at the same time avoid the inevitable scrapes from a large speed bump? No problem. An air bag suspension allows you the best of both worlds with the flip of a switch. If a heavy load has the rear end of your truck squatting lower than usual, the height-control valve (part of the ECAS*) will keep the load level and stable.

Warning and Tips

Maintenance of the air springs, Vehicle Check-List

•  Check the air lines and devices of leakage and that they turns freely.
•  Check the bellows bearing for damage, correct fastening, deformation, sharp edges.
•  Check the shock absorbers for operation and impermeability as well as tightness and bearing.
•  Periodically, check nuts and bolts for proper torque. For specific recommendations see manufacturer's manual.
•  Check axle suspension, trailing arms and rods for wear. 
•  Check height control valve to see that it is functioning properly. A properly maintained valve will save unneeded maintenance expense.
•  Routine inspection of all of the above according to manufacturer's instructions, will extend the life of your vehicle and reduce your overall maintenance expense. 

Air Spring Installation

1. Before you start installing air springs, make sure you have all the necessary tools and equipment to perform the repair safely.
2. Familiarize yourself with the suspension on which you are performing the repair by reviewing the manufacturers service guide.
3. If you are in doubt about something, ask for assistance from a qualified suspension specialist, the suspension manufacturer or the air spring manufacturer; This can save you a lot of time and aggravation later in the job.

Important tips to remember when installing a new unit

• Check levelling valve, linkage and transmission parts for wear and damage and if necessary replace the damaged parts.

• Check that the shock absorber for leakages and take a shock absorber test. A defective shock absorber must be replaced.

• Once the air lines are disconnected, check their entire length for cracks or other damage. Replace worn parts.

• With the air spring removed, other parts of the air suspension become more accessible. Check for wear or damage of the frame hangers, trailing arm bushings, torque rods, the trailing arms and the air spring mounts. When it is necessary, also replace parts.

• Check bearing for air spring bellow for external damage, deformation, sharp edges and correct fastening.

• Before installing the new unit, clean the air spring mounting plates to ensure proper attachment to the suspension.

• Always use new attaching bolts for the installation and observe the tightening torques. Never use old bolts, because these can fall out.

• Check the linkage of the levelling valve to see that it is functioning properly. Under load, the linkage should move from the neutral position up to the intake position. This lets air into the springs, which brings the arm back to the neutral position. This lets air into the springs, which brings the arm back to the neutral position. That opens the exhaust valve, allowing air to escape until the arm returns to the neutral position. Then check the driving level.