Q:
How
long
is
the
delivery
time?
Answer:
The
general
situation
is
3-5
days
for
delivery.
If
you
need
a
customized
mask
shape,
it
will
take
7-10
days.
Please
refer
to
customer
service
for
details.
Question:
The
machine
I
want
is
too
inconsistent
with
what
you
showed
on
the
Internet.
Can
I
do
it?
Answer:
Yes,
you
need
to
provide
machine
pictures
and
finished
mask
pictures.
Question:
What
should
I
do
if
I
buy
a
machine
and
I
won’t
install
it
back?
Answer:
South
Korea
and
Vietnam
have
after-sales
and
can
be
installed
on
site.
Other
countries
can
send
installation
videos
and
remote
video
guidance.
Many
foreign
customers
install
this
way.
You
only
need
to
install
the
four
screws
of
the
connector
of
the
filming
machine
and
the
earband
machine,
learn
to
load
the
cloth
and
operate
normally.
The
company
will
be
equipped
with
text
version
and
video
version
of
the
whole
teaching.
Q:
How
long
is
the
warranty
period?
Answer:
The
warranty
period
is
one
year.
The
ultrasound
is
three
months.
During
the
warranty
period,
the
parts
are
damaged
and
the
company
provides
new
parts.
The
following
information
comes
from
the
Internet
for
reference
only
The flat face mask machine can be maintained in accordance with the following aspects, and it is necessary to shut down the power during the maintenance process:
1. Ultrasonic system of flat mask machine
Check whether the ultrasonic flat mask machine system is kept clean, especially the ultrasonic electric box, vibrator, and welding head must be dry and clean without water. The connecting line must be firmly and frequently to check the degree of wear of the ultrasonic welding head. Pay attention to the ultrasonic wave The scale of the pointer of the voltmeter and ammeter on the electric box is changed.
2. Pneumatic system:
The air filter cup of the flat face mask equipment needs to check whether there is water drainage and also to the air compressor by the way, and the humidity area should be drained to the air compressor every day to check whether all air pipe cylinders are leaking. Cylinder magnetic induction induction The orientation of the device and whether it is operating normally.
3. Appearance
Flat masks are used to wear on the face, and medical masks need to enter the operating room. Therefore, the production of flat masks must require the cleanliness of the mask machine equipment. Every day after get off work, it is necessary to arrange for personnel to shut down the mask machine after the power is turned off. Clean the work surface of the equipment and the plate containing the mask. Note that it cannot be cleaned with water. Use non-toxic and volatile cleaning fluids such as alcohol to clean the equipment.
Four, electrical system
Check whether the joints of the equipment circuit of the flat face mask machine are loose, whether the main power cords, branch signal lines, etc. are worn and aging, whether the electrical equipment is loose, whether a dry environment is maintained in the electrical box, and whether the exhaust fan is not Normal work etc.
Five, transmission system
The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. We need to check whether there are dust and other things attached to the motor that affect heat dissipation, and whether the gears and sprockets are oiled. If there are attachments, then we should Clean up, whether the tightness of the chain is suitable for foreign matter has not been cleaned up, whether the connecting screws between the transmission parts are loose, and the lubricating oil of the reducer is not enough, usually the machine needs to change the lubricating oil after 1000-1500 hours .
Six, anti-rust
Flat face mask machine equipment must not be stuck with easily corrosive liquids and objects. Sweat is very easy to cause the equipment parts to rust. If the equipment does not operate for a long time, it is necessary to apply anti-rust oil to the transmission system of the mask and the parts that are prone to rust.
