304 SS Button Head Self-Tapping Screws Type B Blunt Point Marine & Outdoor A2-70 Passivated

304 SS Button Head Self-Tapping Screws Type B Blunt Point Marine & Outdoor A2-70 Passivated 

Premium A2-70 stainless steel button head self-tapping screws with Type B point. Phillips drive, passivated finish. Resists rust & salt water. For marine, food processing & chemical equipment. M4-M8 sizes.

Demanding corrosive environments require durable fasteners. Our **A2 Stainless Steel Button Head Self-Tapping Screws with Type B (Blunt) Point** deliver exceptional rust and chemical resistance combined with reliable thread-forming performance. Manufactured from A2-70 (304) stainless steel, they excel in **marine, coastal, outdoor, food processing, and chemical exposure** applications. The **Type B blunt point** ensures precise thread cutting in pre-drilled holes without damaging thin materials, while the **low-profile button head** minimizes protrusion and snagging. The **Phillips drive** provides secure tool engagement. Passivation enhances corrosion resistance.

Primary Uses & Applications:

    *   Marine hardware & boat building (deck fittings, hatches, railings).
    *   Outdoor equipment & enclosures exposed to weather/salt spray.
    *   Food & beverage processing machinery & conveyors.
    *   Chemical plant instrumentation & tank fittings.
    *   Pharmaceutical equipment & cleanroom fixtures.
    *   Architectural metalwork (stainless railings, cladding).
    *   High-corrosion industrial environments (pulp & paper, water treatment).
    *   Joining stainless steel sheets or components.

Surface Treatment/Finishes:
    *   **Passivation (Standard):** Essential chemical process removing free iron and enhancing the natural chromium oxide passive layer for maximum corrosion resistance. Slightly matte finish.
    *   **Electropolishing (Optional):** Creates a smoother, brighter, more reflective surface. Further enhances corrosion resistance, improves cleanability (ideal for food/pharma), and slightly reduces friction during installation.

How to Use:

    1.  **Prevent Galling:** **ESSENTIAL STEP!** Apply a **stainless steel specific anti-seize compound** (e.g., nickel-based) generously to the screw threads before installation. This drastically reduces friction and prevents galling (cold welding/seizing), especially in stainless-on-stainless applications.
    2.  **Prepare Hole:** **Drill a precise pilot hole** slightly smaller than the screw's **minor diameter** (core dia. - approx. 75-85% of nominal shank dia.) in the top material. Hole quality is critical for Type B performance. Use sharp drills, deburr.
    3.  **Align & Insert:** Position materials. Insert the screw.
    4.  **Drive:** Insert the **correct size key/bit**. Drive the screw at a **MODERATE SPEED** with **steady, firm pressure**. The Type B point will cut clean threads. **Avoid high RPMs** which generate heat and dramatically increase galling/seizing risk.
    5.  **Tighten:** Seat the button head firmly. **DO NOT OVERTIGHTEN.** Use the recommended torque for A2 stainless steel. Stop once resistance increases significantly after head seating.
    6.  **Removal:** Use the correct key/bit. Apply steady torque. Anti-seize should facilitate removal. If seized, do not force - risk breaking the head.