250V AC 40A 95C Celsius NC Temperature Control KSD Bimetal Thermostat KSD307

KSD307 series temperature controller is a bimetallic sheet contact temperature sensing relay with a fully closed shell. According to the principle of thermal expansion and cold contraction, the metal sheet will be bent so as to achieve the maximum jump and switch in the pre-set temperature range, which plays an important role in the safety protection of electrical appliances. The disconnect temperature and reset temperature can be made according to customers’ requirements.

KSD307 series of 1/2 "(13mm) self-hold bimetallic disc thermostat provides time-tested reliability in a wide range of applications. The self-hold construction incorporates a PTC heater that is located throughout the electrical position of the contacts. When the contacts are closed, the PTC heater is shunt and therefore not energized. When the contacts are open, the PTC heater is connected to the load in series and energized to keep the temperature sensitive bimetal in an actuated state. To reset the temperature sensing control, power to the device must be cycled off to allow sufficient time for the component to cool down to a temperature below the bimetal switch reset point. KDS307 has a stable and reliable working temperature. It can be used repeatedly and is suitable for high reliability requirements of electrical safety protection.

 

Product Characteristics
1. power component integrated structure, high temperature accuracy;
2. fast temperature sensing, reliable and simple action, long life cycle;
3. easy to install with fixed mounting hole;
4. automatic reset/manual reset;
5. set the temperature value according to customer’s requirements;

Advantage
1. Repeated use;
2. Anti-interference;
3. Rapid heat transfer;
4. No glitches, no flashover;
5. Each thermostat will be tested and the temperature pass rate is high;

 

Product name:	KSD307 themostat
Rated voltage/rated current	AC250V/40A
Range of rated switching temperature	50℃~ 170℃
Number of rated switching cycles at rating loading	10,000 cycles
Switching temperature tolerance	± 5℃
Speed of temperature changes to determine switching temperature	0.5 ℃/ minute
Thermal resistance	Max 210℃/ minute
Temperature limit of the switch head	190℃
Temperature of the mounting face	190℃
Degree of protection	IP30
PTI of material used for insulation	250V
Rated impulse voltage	2500V
Contact resistance	≤ 50mΩ
Appliance:	Coffee maker, water dispenser, toaster, microwave, heater, portable refrigerator and etc