Junbond Nail Free Glue

Nail Free Adhesive Glue 400Ml Quick-Drying Super Strong Nail Free Gule

Junbond^®  JBN1 has a strong adhesion, can be the greatest alternative to nails, no surface drilling to fix and bond wood, doors and windows, gypsum board, medium density fiberboard, stone, ceramic tile, metal, plastic, rubber and other materials.

Product Features:

1, Super strong initial viscosity, high bonding strength;
2, Wide range of uses, the vast majority of substrates can be bonded, and even wet wood can be bonded;
3, Flexible, weathering, waterproof, non-brittle, will not affect the adhesion of buildings contraction movement;
4, Will not subsidence, can be sealed, dry paint;
5, Does not contain formaldehyde, benzene and other harmful substances;
6, Anti chemical corrosion, anti cold, high temperature.

Application Method:

1.1,Clean the base material surface to ensure no oil and dirt.

1.2,Cut the cartridge mouth, poke the aluminum film with a nozzle.
Put on the nozzle and extrude the glue with a caulking gun.

1.3,Light material sticking method: Put a proper amount of glue
on the back of material that needs to be sticked, then put on the base material,
then press tight and fit.

1.4,Heavy material or fast bonding method: After glue, pressurize and
tighten up the material, then gently pull open. Air for 1-2 minutes,
then pressurize and tighten up the material again.

1.5,Large material no need separation bonding method:
Glue on the surface of both material that need to be sticked,
scrape the glue evenly with a scraper. Air for 3-5 minutes,
then pressurize and tighten up the material.

1.6,After pressurize and tighten up the material,
24 hours to reach the use of strength. 72 hours to reach the best strength.

Precautions:
1, Nail free glue has not yet been solidified, the loose oil can be used to remove dry after the use of scraping or grinding in addition to residual stains exposed. The product can be used with the laying of the floor.
2, High temperature adhesion will be weakened (to avoid long-term bonding in the sunshine of the metal).

Charactertics:

1- Easy to apply

2- For general construction, remodeling, maintance & repair projects

3- Reduces nail pops & fastener use

4- Bonds dry wall, paneling & plywood to wood or steel framing.

5- Heat and water resistant

6- Quick-grab formula requires less bracing

Application Areas:

1- Wood to wood assemble application.

2- Metal joints to lumber, lumber and treated lumber.

3- Prefinished panels.

4- Bathroom fixtures.

5- Fiber glass shower enclosures.

Caveat:
1- The product is a dangerous product, should be stored in a cool, dry place. Construction environment must be well ventilated, away from high temperature and fire source;
2- The product should be stored in children can not get to avoid contact with the eyes, not dumped into the sewer. If swallowed, should be immediately sent to hospital for emergency treatment, and produce the product container or label;
3- If the use of the process of dizziness and other adverse conditions, immediately to the outdoor fresh air or immediately seek medical attention.
4- If the product contact with the eye, rinse with water for 15 minutes, then immediately seek medical attention.

Color

* White

Storage:

Storage Instruction: Store cartridge in dry and cool place

Shelf life: 24 months from the date of manufacturing.

Product TDS:

Application:                                                                                                                                                       

Junbom Hui Bei Factory                                                                                                                                

Package & Delivery                                                                                                                                   

Exhibition                                                                                                                                                      

FAQ                                                                                                                                                               

Q1: Are you factory?

A1: Yes, we are factory.

Q2: Can I do an OEM?

A2: Yes,we do the brand, logo as your requirements.

Q3: What other products do you have?

A3: Besides our mainly products silicone sealant, and polyurethane foam, we also have many other products, such as liquid nails,beauty sealant,glass glue,polyurethane foam cleaner ,foam gun and silicon gun etc.

Q4:Why we choose you? What is your strength?

A4:With 30 years experiences in this field, we are a professional supplier of the well-know customers. Our facilities conform to the standard audit requirement and our products meet the certification terms from different countries and areas.

Q5: Agent's wanted?

A5: Welcome general agent all over the world.

Q6:What is your sample policy?

A6: We can supply 2-3 samples for free, but as this is aerosol products with pressurized gas, it is dangerous goods, we only supply the Cured sample.And the freight cost need to be prepaid by customers.

If you want to know more details information, pls just feel free to contact us! :)