Single Convoluted Industrial Air Springs With Flange TORPRESS 110 Replacement

TORPRESS 110 Replacement Single Convoluted Industrial Air Springs With Flange

Cross Reference

TORPRESS 110

Specification and Technical Parameters

The characteristics of air spring

(1) The elastic coefficient of the air spring is variable, and as the applied load increases, the elastic coefficient also increases. The air spring can design various effect curves to meet various performance requirements because the air spring has a nonlinear effect.
(2) The rubber body of the air spring is relatively light, and the mass of the air is also very small. Most of the weight of the air spring comes from the upper cover and the lower cover. Unlike the steel spring, the metal mass is relatively heavy.
(3) The bearing capacity of the air spring can be adjusted according to the inflation pressure in the rubber airbag. For the same air spring, different bearing capacity requirements can be met by adjusting the inflation pressure.
(4) Since the air spring uses air as the elastic medium, when compressed, the internal friction is small, so the vibration isolation effect is relatively good. In addition, air springs have a good ability to cancel noise because air and rubber are relatively weak in transmitting sound.
(5) The anti-fatigue ability of the air spring is relatively strong. The experiment shows that the number of stress cycles that the leaf spring can withstand under normal circumstances is 500,000 to 600,000 times, while the general air spring can reach about 3 million times. High-quality air The number of stress cycles that the spring can withstand can reach more than 5 million times. Air springs are therefore highly effective in resisting strain.

TORPRESS 110 other model

The related picture of air spring/air shocks/air spring assembly/air bag