Remote Control 160KW Industrial Online UPS 200KVA UPS Power System

High intelligence and reliable power supply:
ZGD330 provides maximum protection for vital mission-critical networks, security applications (electro- medical)and industrial applications thanks to its outstanding mechanical and electrical design.
The load is powered continuously by the inverter with a filtered, stabilized and regulated sine wave supply. The input and output EMI filters considerably increase the immunity of the load to mains disturbances and surges.
The ZGD330 uses on-line double conversion technology (VFI) with isolation transformer on the inverter output.
The ZGD330 is supplied with Watch & Save 3000 software as standard and can be remotely monitored
using the Power Net Guard system from anywhere in the world. Additional battery extension packs allow the standard battery routine to be extended up to several hours.

Maximum battery care:
Battery deep discharge protection;
Temperature compensating charger;
Built-in automatic and manual battery test feature.

Simple to install:
Capability to install the UPS into any distribution system(neutral not required on rectifier input);
Capability to separate the rectifier/bypass power networks and to power these from two separate sources, without Galvanic isolation (Necessary on UPS without an output transformer).

High reliability:
Extremely high short-circuit current to ensure compatibility with the most difficult transformer applications (lighting, drives and industrial processes) and an isolation transformer on the inverter output;
Full microprocessor control with no-break static and manual bypasses;
IGBT technology.

Other characteristics
0.8 power factor make ZGD330 suitable for powering ICT and Industrial loads;
High level diagnostics: event log with 128 messages, states, measurements and alarms - available from the built-in LCD with several languages 

Specification

 

Model power	ZGD330 10-200KVA
	200KVA
Capacity	160 KW
Input
Rated voltage	380/400/415 Vac three-phase
Voltage range	±20%
Frequency range	45-65Hz
Power factor	>0.92with harmonic filter
Current harmonic distortion	<5%with harmonic filter
Soft Start	0-100% in10"
Bypass Input
Rated voltage	380/400/415 Vac three-phase
Permitted voltage range	±15%(selectable from ±10% to ±25% from front panel)
Rated frequency	50/60Hz
Permitted frequency range	±2%(selectable from ±1% to ±5% from front panel)
Standard features	Back Feed protection; split bypass line
Batteries
Type	Maintenance-free lead-acid VRLA AGM / GEL;NICd
Battery voltage	480VDC
AC ripple voltage	<1%
Inverter Output
Number of phases	3+N
Rated voltage(V)	380Vac
Static stability	±1%
Dynamic stability	±5%
Frequency	50/60Hz configurable
Overload	110% 125% 150% of the rated current for 5h/10'/1'
Frequency stability	±0.05% on mains failure;±2%(selectable from ±1% to ±5%)with mains supply present
Remote signaling	Volt free contacts
Remote controls	EPO and Bypass
Communication	RS232 + romote contacts
Operation temperature	0ºC/ + 40ºC
Relative humidity	<95% non condensing
Noise	50-65dBA at 1m
Protection degree	IP20
Efficiency smart mode	up to 98%
Compliance	Safety:EN 62040-1-1(Directive 2006/95/EC); EMC:6200-2(Directive 2004/108/EC)

​

Certificate

Packing & Delivery