Sprag Sealed One Way Clutch Bearings RSCI40 Cam H7 Chrome Steel

RSCI40 Backstop Cam Bearing One Way Sprag Type Clutch

Features:

Type RSCI is a centrifugal lift off sprag type freewheel with the inner race rotating. Only the inner

race is designed for freewheeling. It is a non self- supported type.
Bearings must be provided to ensure concentricity of the inner and outer races support axial and

radial loads, as shown overleaf.

Concentricity and runout limits must be observed. The RSCI type accepts all types of lubricant

currently used in power transmission equipment. It is possible to mount these freewheels directly

in gear-boxes without separate lubrication. An oil mist is generally sufficient. Grease lubrication

may be acceptable if the unit works mostly in overrunning condition, as on E-motors.
When used as a backstop, it must be checked that the overrunning speed will not go below the

minimum speed given in the characteristics table.

Dimension and Capacity:

Notes:

1) T max = 2 × T KN

2) This maximum allowable torque transmission speed nmax must not be exceeded when transmitting torque.

3) This minimum allowable overrunning speed ni imin should not be reduced under continuous operation.
Possible reduction of this minimum speed on request

4) Inner race overruns Keyway to DIN 6885.1

5) Tolerance +1

Cover F8 must be ordered separately