Product Details

220v 1hp Servo Driver 1000w Vfd For Servo Motor

Product Function Introduction

1 Support pulse command input and RS485 command input;

2 Rich multi-functional ports, supporting common Yin and Yang connection;
3 Support 17 bit single turn absolute vaLue encoder;

4 Easy connection with touch screen (HMI)
Simplified control system
Save wiring
Parameter setting and status monitoring

5 Direct control via switch
Minimalist motion control scheme
Ultra low cost design
Cyclic control of point motion

Parameter:

Wiring diagram of position control mode

1. The internal +24v power supply voltage range is 20v~28v, and the maximum working current is 100mA.

If an external 24V power supply is used, please connect the external power supply +24v to pin 16 (COM),

and the external power supply 0V to pin 43 (e0v).

2. The user of do output power supply needs to provide it by himself. The recommended

working powersupply voltage is DC24V, and the conduction voltage drop of do port is about 2.4V.

Please pay attention to it in application.The maximum allowable voltage of do port is DC30V

and the maximum allowable current is 50mA.

220v 1hp Servo Motor Drive 1000w VFD Modbus RTU Communication For Servo Motor