Fiber Optic Terminal Box Fiber Optic Junction Box

Fiber Optic Terminal Box Application

Optical fiber terminal box is designed for network systems, data and image transmission systems, for indoor fiber optic cable straight-through force and branch continuity, as well as for storage of pigtails and connector protection.

Product Features
 

All performances meet the parameters specified in YD/T925-2009 standards:

• Adhesion of the coating and the steel housing exceeds the Level 2 requirements of GB/T9286;
• Coupled with optical fiber installation panels, the patch panel is suited for 4-16 port (SC, ST, FC) adapters;
• Axial tension between the terminal box and the single fiber is more than 250N;
• Electrostatic powder is sprayed in steel plate, designed in a scientific way and with a sense of beauty;
• Optical fibers are protected all along the route so as to ensure that the bend radius is more than 40mm and the performance is free from the influence of cabling;
• Optical fibers are well connected and properly grounded, thus ensuring security and stability;
• The built-in splice tray with cover design holds up to the most 16 splices, making it easier to operate and maintain;
• The steel frame features 1.0 mm thickness, high mechanical strength, and each of its housing withstanding more than 250N vertical static pressure, not easy to deform;
• The terminal box passes GB/T2423.17-1993 standard salt spray test (within 48 hours), no visible rust spots in the surface.

Application Standards
 

YD/T926.3; YD/T778-2011; TIA/EIA568