SUS304 300-3600L Vacuum Harrow Dryer Sludge Drying Equipment

Price	USD20000-USD300000
MOQ	1set
Delivery Time	60-90days
Brand	JingSu ShengMan
Place of Origin	China
Certification	CE and ISO9001
Model Number	ZKG
Packaging Details	Plywood Cases
Payment Terms	L/C, T/T
Supply Ability	10sets

Product Details

Product Specification

Condition	New	Place of Origin	China
Warranty	1 year	Packaging Details	Plywood Cases
Material	SUS304, SUS316L	Model Number	ZKG
Supply Ability	10sets	Certification	CE and ISO9001
Brand Name	JingSu ShengMan	Payment Terms	L/C, T/T
Working Volume	300-3600L	Type	Vacuum Harrow Dryer
Price	USD20000-USD300000	Delivery Time	60-90days
Heating Source	Steam/Thermal Oil	Minimum Order Quantity	1set
Heating area	3.2-16.5㎡	Pressure in the cylinder	-0.096-0.15
power	4-22kw	stirring revolution	8-18rmp

Product Description

Factory Price Environmental Protect Vacuum Harrow Dryer For Sludge

Product

The vacuum paddle dryer is new type high-efficiency horizontal vacuum drying equipment. It adopts jacketed structure, and the jacket can be heated by steam, hot water or conduction oil. The jacket transfers the heat to the inner wall of the shell via conduction or radiation. The dried materials are added into the dryer through an opening in the middle of the machine shell. Constant stirring of the revolving harrow causes the materials move back and forth. The surface contacting with the inner wall of the shell constantly updates, resulting in high drying rate and uniform finished products.

The dryer is simple to operate, easy control the material, greatly reducing the labor intensity of workers, also reduce the material pollution in the drying process at the same time.

1. The reducer: the reducer installed in the right side of the machine. The motor was driven by the pulley and the V-belt to the gear unit, the spindle rotation to the rake teeth, and finally the cylinder rotated and get speed of 6~ 10 r / min.

2. The motor base device: The motor was mounted on the right side of the activity board, can be adjusted up and down, so that the V-belt tight fit.

  
  
  
  3.
  Vacuum
  tube:
  Used
  to
  extract
  the
  cylinder
  evaporation’s
  solvent
  (or
  water)
  .
  In
  the
  inlet
  side
  with
  a
  filter,should
  be
  covered
  with
  filter
  cloth
  to
  prevent
  the
  material
  out.

4. Electrical control device (EU standard): All the electrical control, buttons, lights are installed in the control box, the operation can be controlled based on the panel text instructions. The positive and the reversing rotating direction of the stirring shaft can be adjusted according to the characteristics of the material. Generally, it can be controlled in about 5 minutes (ie, after stopping for 5 minutes, then reversing for 5 minutes).

5. Sealed structure: The spindle at both ends are sealed with PTFE , sealed in a vacuum to achieve a good sealing effect.

  
  
  The
  mixing
  shaft
  with
  stainless
  steel
  thick-walled
  tube,
  rake
  arm
  rake
  teeth
  are
  made
  of
  stainless
  steel
  seamless
  stainless
  steel
  plate.
  Rake
  board
  was
  PTFE
  plated,
  scraping
  the
  sticky
  material.

Technical parameters

Item	ZKG-500	ZKG-1000	ZKG-3000	ZKG-6000
Working volume ( L)	300	600	1800	16.5
Heating area (㎡)	3.2	5.1	10.6
Stirring revolution (rmp)	8-18
Power (kw)	4	5.5	11	22
Design Pressure of Jacket ( mpa)	0.3
Pressure in the cylinder (mpa)	-0.096-0.15

Note: The above data is for reference only. If having special requirements, the factory can provide the service of consultation and design.

Applications

  
  
  
  
  
  ZKG
  vacuum
  harrow
  dryer
  equipment
  is
  designed
  for
  drying
  slurry,
  pasty,
  powdery
  materials,
  thermal
  sensitive
  materials
  requiring


  low-temperature
  drying,
  easily
  oxidized
  materials,
  as
  well
  as
  explosive
  materials,
  toxic
  materials
  and
  the
  materials
  whose
  organic
  solvents
  should
  be
  recovered.
  This
  vacuum
  drying
  equipment
  is
  applied
  to
  the
  pharmaceutical,
  nourishment,
  food,
  chemical
  and
  other
  industries.

Feature:

The dried material is added from the middle of the shell. Under the stirring of the rotating rake teeth, the surface of the

    
    
    material
    is
    constantly
    updated
    when
    it
    contacts
    with
    the
    shell
    wall.
    The
    dried
    material
    is
    indirectly
    heated
    by
    steam,
    and
    the
    moisture
    of
    the
    material
    is
    gasified.
    The
    gasified
    moisture
    is
    pumped
    away
    by
    the
    vacuum
    pump
    in
    time.
    The
    machine
    can
    use
    the
    sandwich
    and
    rake
    teeth
    heating
    method
    at
    the
    same
    time,
    with
    larger
    heat
    transfer
    area
    and
    high
    thermal
    efficiency
    was
    obtained.
    Due
    to
    the
    high
    operating
    vacuum,
    the
    water
    vapor
    pressure
    on
    the
    surface
    of
    the
    dried
    material
    is
    much
    higher
    than
    that
    in
    the
    evaporation
    space
    of
    the
    drying
    shell,
    which
    is
    conducive
    to
    the
    discharge
    of
    the
    internal
    and
    surface
    water
    of
    the
    dried
    material,
    and
    the
    movement
    of
    the
    water
    molecules
    of
    the
    dried
    material,
    so
    as
    to
    achieve
    the
    purpose
    of
    drying.
  

Sale service:
(1). Ensure product with high quality and pre-commissioning before delivery. (2). Delivery on time. (3). Provide full set of documents as customer’s requirements.

After-sale service:
Provide considerate services to minimize clients’ worries.
1. Assist clients to prepare for the first construction scheme.
2. Install and debug the equipment.
3. Train the first-line operators.
4. Examine the equipment.
5. Take initiative to eliminate the troubles rapidly.
6. Provide technical support.
7. Establish long-term and friendly relationship.

Service commitment:
1. Provide clients one-year warranty to make sure the machine work well.

2. We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely.

3. Send every client a preferential quotation.