English
Sign in
| Price | USD20000-USD300000 |
| MOQ | 1set |
| Delivery Time | 60-90days |
| Brand | JingSu ShengMan |
| Place of Origin | China |
| Certification | CE and ISO9001 |
| Model Number | FZG/YZG |
| Packaging Details | Plywood Cases |
| Payment Terms | L/C, T/T |
| Supply Ability | 10sets |
| Condition | New | Place of Origin | China |
| Warranty | 1 year | Packaging Details | Plywood Cases |
| Quantity of baking tray | 4-48 | Material | stainless steel |
| Condensor | choosed by customer | Model Number | FZG/YZG |
| Supply Ability | 10sets | Certification | CE and ISO9001 |
| Weight | 250-3200kg | Brand Name | JingSu ShengMan |
| Payment Terms | L/C, T/T | Layers of Baking | 4-12 |
| Temp | 35-150℃ | Price | USD20000-USD300000 |
| Delivery Time | 60-90days | Heating Source | Hot Water/Steam/Thermal Oil |
| Minimum Order Quantity | 1set | size of baking tray | customizable |
Hot Sale YZG Round Vacuum Tray Dryer for Sweet Potato Powder
PRODUCT SHOW
Pure water has a maximum speed at which vaporization Boiling state. Under normal conditions, about 100 ℃ when the water began to Boiling. And in vacuum conditions, due to the system of water vapor partial pressure of water vapor partial pressure far below the surface of the material, the boiling point of water is less than 100 ℃. For example: the surface down to -0.07MPa, water starts at 70 ℃ Boiling. So, although at a lower operating temperature of the dryer is still a large drying capacity.
Principle
Vacuum Drying is to let the raw material to be dried at vacuum condition. It uses vacuum pump to pump damp air out and make the working chamber form vacuum status. Therefore, the drying speed of raw material is improved and the energy is saved greatly. Notes: The solvent of raw material can be collected by using a condenser. If the solvent is water, the condenser is not required in order to save investment cost.
Features
1. The boiling point of raw material will be decreased under the vacuum condition and make the evaporator increases the pushing force of heat transfer.
2. The heat source can be low pressure steam or waste heat;
3. The loss of the heat during the evaporation is only a little.
4. The disinfection treatment can be carried out before drying and there is no impurity material mixing during drying process. It is in conformity with the requirement of GMP;
5. Static vacuum dryer will not damage the shape of raw materials.
Technical parameters
| Inner Size mm | φ600*976 | φ1000*1527 | 1500*1060*1220 | 1500*1800*1220 |
| Outer Size mm | 1135*810*1020 | 1693*1190*1500 | 1924*1720*1513 | 1924*2500*1513 |
| layers of baking | 4 | 6 | 5 | 12 |
| Interval mm | 81 | 102 | 122 | 122 |
| size of baking tray mm | 310*600*45 | 520*410*45 | 460*640*45 | 460*640*45 |
| Temp | 35-150 | 35-150 | 35-150 | 35-150 |
| weight | 250 | 800 | 1400 | 3200 |
Note:
The
above
data
is
for
reference
only.
If
having
special
requirements,
the
factory
can
provide
the
service
of
consultation
and
design.
Applications
This dryer is suitable for drying heat sensitive raw materials that can decompose or polymerize or deteriorate at high temperature. It is widely used in pharmaceutical, chemical, foodstuff and electronic industries.
Pre-service:
As
a
good
and
rich
experience
supplier,
we
should
offer
customer
the
best
quality
and
best
price
of
the
machine.
1.
Introduce
the
suitable
product
to
the
customer
in
detail,
answer
the
question
raised
by
customer
carefully.
2.
Make
the
suitabe
project
as
the
customer
requirement
and
make
sure
the
machine
is
suitable
for
the
material.
Sale
service:
(1).
Ensure
product
with
high
quality
and
pre-commissioning
before
delivery.
(2).
Delivery
on
time.
(3).
Provide
full
set
of
documents
as
customer’s
requirements.
After-sale
service:
Provide
considerate
services
to
minimize
clients’
worries.
1.
Assist
clients
to
prepare
for
the
first
construction
scheme.
2.
Install
and
debug
the
equipment.
3.
Train
the
first-line
operators.
4.
Examine
the
equipment.
5.
Take
initiative
to
eliminate
the
troubles
rapidly.
6.
Provide
technical
support.
7.
Establish
long-term
and
friendly
relationship.
Service
commitment:
1.
Provide
clients
one-year
warranty
to
make
sure
the
machine
work
well.
2. We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely.
3. Send every client a preferential quotation.
