STD150 6'' Plumbing Tools Drain Cleaner Machine 570W Plungers Drain Snakes or Augers Drain Jetters

STD150 6'' Plumbing Tools For Sale Drain Cleaner Machine 570W

Product Description for drain pipe cleaning machine

Featuring
1. Suitable for all kinds of indoor and outdoor pipe cleaning

2. Easy to transport and use

3. Ideal for household and construction site

4. Particularly light, compact handy design, ideal for general purpose maintenance work on baths, wash basins, toilets, in kitchens, waste pipes, drains and down-pipes.

5. Direct connections of cables with diameters of 16 mm and 22 mm for working in pipes up to 150 mm in diameter.

6. The perfect, all-round sink, shower and floor drain machine.

7. Unique, easy-to-use, instant-acting cable clutch maximizes operator control:

Pull handle down and cable spins at 460 RPM

Release handle, cable stops instantly

8. Equipped with 750 W motor,110 V,220 V models

9. Includes drain cleaning machine mitt and operator's manual

10. Approved by CE standard

Specifications:

For 3/4" to 6" (19 mm to 150 mm) pipes in diameter

Equipped with 750 W motor , 220 V -50 Hz / 110 V - 60 Hz

No load speed of 400 RPM

Max working length: 50 m with 16 mm in dia. cable / 60 m with 22 mm in dia. Cable

Factory Direct with complete tool sets

Main machine
Cable holder with 5pcs*16 mm *2.3 m cables
Cable holder with 5pcs*22 mm*2.3 m cables
4pcs of 16 mm cutters : straight auger, bulb auger, cross-blade cutter and grease cutter
4pcs of 22 mm cutters : straight auger, bulb auger, funnel auger and spade head cutter
1pc of tool case
1 pc of φ4 key and 1pc of φ5 key
A pair of protection gloves

Operation Instructions

Insert the flexible shaft into the tail of the main machine first, reasonably select cutter head and fit in flexible shaft according to different obstructions, put the flexible shaft into the pipeline, start switch of power source when reach obstructions, press clutch handle to make flexible shaft rapidly rotate to mash the obstructions. If the pipeline is still dredged, let the clutch free and push the flexible shaft deeper in pipeline continually, operate repeatedly up to dredging of pipe. When dredge the pipeline with water, please use the suitable shaft, connect the roller at the tail of the machine and pull out the shaft according to the length to be used.

Mechanical Drain Cleaners: These are tools designed to physically remove clogs from drains. Common mechanical drain cleaners include the following:

Plungers: Plungers are simple suction devices that create pressure and suction to dislodge clogs. They are commonly used for toilets, sinks, and bathtub drains. By creating a seal around the drain opening and pumping the plunger up and down, the pressure can help move the clog and restore drainage.

Drain Snakes or Augers: Drain snakes or augers are long, flexible cables with a coiled or hooked end. They are inserted into the drain and rotated to break up or retrieve clogs. The end of the auger can grab onto debris or break it apart, allowing it to be pulled out or flushed away.

Drain Jetters: Drain jetters use high-pressure water to clear clogs. They are typically used for more stubborn or difficult clogs and are often employed by professional plumbers. The high-pressure water jet can effectively break up and remove debris, clearing the drain.

It's important to note that the choice of drain cleaner depends on the severity and type of clog, as well as the specific plumbing system. For persistent or severe clogs, it may be best to consult a professional plumber who can assess the situation and use the appropriate drain cleaning method.

Additionally, it's always recommended to use drain cleaners in a well-ventilated area and to take proper safety precautions, such as wearing gloves and protective eyewear, when handling chemical drain cleaners.

Machine Storage

Motor-driven equipment must be kept indoors or well covered in rainy weather. Store the machine in a locked area that is out of reach of children and people unfamiliar with drain cleaners. This machine can cause serious injury in the hands of untrained users.

If machine has been exposed to freezing weather, unit must be run for ten (10) to twenty (20) minutes without load to warm up. Failing to do this will result in frozen bearings. If machine is exposed to weather for a period of time, moisture will form across motor windings causing motor to burn out.

Optional plug for you

Our service

1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in plywood cases.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% balance against BL copy. L/C at sight.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 30 to 40 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. Do you test all your goods before delivery?
A: Yes, we have 10% test before delivery
Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.