Product Details

1 Port Gigabit Fiber Media Converter 1 1000M Rj45 Port Rail Type Media

Feature

RJ45 port 10/100/1000M adaptive, with MDI and MDI-X auto recognition, automatic detection, automatic learning, good compatibility
Provide 2 RPS (Redundant power supply) input : 9.6 ~ 60 VDC and 18 ~ 30VAC
Provide reverse polarity protection
Support maximum 1536 byte long data packet transmission
Side of the DIP switch dial 1 is enabled broadcast storm, dial the disabled broadcast storm
With rugged metal housing IP30
Support rails or distribution cabinet installation

Parameters	Specifications
Access mode	10/100/1000Mbps
Standard	IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast Ethernet,IEEE802.3ab 1000Base-T,IEEE802.3z 1000Base-SX/LX Gigabit thernet, IEEE 802.3x Flow Control,IEEE802.1d Spanning Tree,IEEE802.1q vlan,IEEE802.1p Qos
Wavelength	850nm/1310nm/1550nm
Transmission distance	Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km;single-fiber single-mode: 25/40/60/80/100Km Category-5 twisted pairs: 100m
Port	One RJ45 port: Connected to STP/UTP category-5 twisted pairs One fiber port: Multi-mode – SC or ST (fiber size: 50,62.5/125μm) Single mode – SC/FC fiber port (fiber size: 9/125μm) Single-fiber single-mode – SC/FC fiber port (fiber size: 9/125 μ m)
Conversion mode	Medium conversion, storing and forwarding/straight-through
MAC address table	4 K
Buffer space	2Mbit
Flow control	Full duplex state: flow control; half-duplex state: back pressure mode
Delay	Storing & forwarding: 9.6 μ s; straight-through: 0.9 μ s;
Bit error rate	<1/1000000000
MTBF	100,000 hours
LED	FX LINK/ACT (fiber link/action) SPD (twisted pair: transmission rate of 1000M) TP LINK/ACT (twisted pair link/action);P1 (power supply P1) ,P2(power supply P2)
Power	12/24/48 VDC,18 ~ 30VAC input
Power consumption	2.5W