English
Sign in
| Price | Negotiable |
| MOQ | 240 |
| Delivery Time | about 3-5 working days after payment |
| Brand | MC SILICONE |
| Place of Origin | China |
| Certification | MSDS |
| Model Number | MCSIL-E160 |
| Packaging Details | 1kg/can , 5kg/can , 10kg/drum , 20kg/drum , 25kg/drum , 200kg/drum |
| Payment Terms | L/C, , T/T, Western Union, PayPal , |
| Supply Ability | 4000kgs/day |
| Viscosity | 3700 cps | Working time | 30-40mins |
| Place of Origin | China | Thermal conductivity（W/m·K） | ≥0.6 |
| Packaging Details | 1kg/can , 5kg/can , 10kg/drum , 20kg/drum , 25kg/drum , 200kg/drum | Product Name | Silicone Rubber |
| HS Code | 39100000 | Color | Grey |
| Model Number | MCSIL-E160 | Hardness | 50-60 shore A |
| Volume resistivity（Ω·cm） | 7X1014 | Supply Ability | 4000kgs/day |
| Certification | MSDS | Brand Name | MC SILICONE |
| Payment Terms | L/C, , T/T, Western Union, PayPal , | Price | Negotiable |
| Delivery Time | about 3-5 working days after payment | Minimum Order Quantity | 240 |
| Dielectric breakdown voltage kv/mm 25°C | ≥20 | Mixing ratio | 1:1 |
Thermal Conductive 1:1 Mix RatioTwo-Part Liquid Silicone Encapsulant 160 Elastomer Kit For Electronics Modular Potting
Product
Description
Silicone
Encapsulant
160
Silicone
Elastomer
is
a
two
component,
room
temperature
or
heat
curing
encapsulant
that
is
used
for
general
potting
applications
of
power
supplies.
It
has
good
flowability,
moderate
thermal
conductivity,
and
flame
resistance.
Typical
Use
General
potting
applications:
power
supplies,
connectors,
sensors,
industrial
controls,
transformers,
amplifiers,
high
voltage
resistor
packs,
relays.
Features
Easy mix with 1:1 proportion
Low viscosity, good flow ability
Room temperature cure or heat up cure
Thermal conduction, flame resistance
Without solvent
Using Instructions of Electronic Potting Silicone Compound& Encapsulates
1. Preparing: clean up the coating surface, remove the rust, dust, oil dirt.
2. Pouring: weigh the silicone and catalyst correctly, mix silicone part A and part B thoroughly, pour onto the electronic components/surface after vacuum degassing.
3. Curing: room temperature cure or heat-up cure is both workable.
It should be use up after open the package, the material must be kept in a cool place sealed well, and it should avoid from contactwithmoisture in the air.
Technical datasheet of Electronic Potting Silicone Compound& Encapsulates
| Item No. | RTV160 |
| Before curing | |
| Appearance | A: brick red B: transparent |
| Viscosity (mPa.s 25°C) | 3000~6000 |
| Density (g/cm3 ) | 1.57±0.02 |
| Working life (min 25°C) | 30 |
| Curing time (hrs) | 24 |
| Heat-up at 100°C (min) | 10 |
| After curing | |
| Hardness (shore A) | 50~60 |
| Dielectric breakdown voltage kv/mm 25°C | ≥20 |
| Volume resistivity ohm*cm | 1*1015 |
| Tensile Strength Mpa | ≥0.6 |
| Thermal conductivity cm/°C | 0.525*10-3 |
| Working temperature °C | -30~200 |
Note: Mechanical and electrical performance data tested at 25°C 7 days after curing, relative humidity of 55%; all the tested data is average value.
Packaging of Electronic Potting Silicone Encapsulates
Packs are available in 20kg and 200kg per drum.
Storage & Transportation of Electronic Potting Silicone Encapsulates
Keep it from strong sunshine, heat, and store in cool & dry place, well sealed. It has a shelf life of 12 months.
It can be stroked and transported as non-dangerous goods.
